Designed to meet the needs of low-to-medium throughput plate processing
Built for both off-line and on-line configurations, the EG-M62 has a recommended throughput of up to 250 m2 per week. Designed with ease of operation and maintenance in mind, the EG-M62 provides simple access to the processor tank as well as quick release side panels allowing access to the plumbing, control and drive systems. A full screen interface provides constant feedback on the machine status and allows intuitive interaction with the software that controls all aspects of the machine operation.
 
Maximum Plate Width
24.4 inches (850 mm)
 
Minimum Plate Length
10 inches (254 mm)
 
Plate Thickness
0.006 - 0.012 inches (0.15 - 0.30 mm)
 
Plate Transport Speed
55.12 inches / min. (1400mm / min)
  Pre-Wash Tank Capacity 3.50 US Gallons (13.25 Litres)
  Developer Tank Capacity 7 US Gallons (26.5 Litres)
  Rinse Tank Capacity Direct to Drain
 
Finsher Tank
0.32 US Gallons (1.2 Litres)
 
Plate Input Height
32.2 - 41.5 inches (819 - 1055 mm)
  Dimension (LxWxH)

69.3 x 34.6 x 37.6 - 46.9 inches (1760 x 880 x 957 - 1193 mm)

 
Machine Weight
937 lbs (425 kg)
  Recommended Room Temperature 64.4 to 84.4 ºF (18 to 29º C)
  Noise Less than 70 dB(A)
  Avg. Weekly Recommended Throughput Upto 2691 ft2 (250 m2)
  Electrical supply 220-240VAC 1W + N + PE/GND 28A - 50/60 Hz
220-240VAC 2W + PE/GND 28A - 60 Hz
380-415VAC 3W + N + PE/GND 16A - 50/60 Hz
  Plan & footprint

Specifications are subject to change without notice.