|
| |
 |
|
| |
Plate Type |
Positive Thermal CTP Plate - optional post heat |
| |
Applicaton |
High quality commercial color and quick printing |
| |
Substrate |
Electrochemically grained and anodized lithographic aluminum |
| |
Plate Gauge |
0.15 mm / 0.30 mm |
| |
Plate Size |
Maximum width 1310 mm |
| |
Wavelength |
830 nm |
| |
Sensitivity |
120-140 µj/cm(sq.)
|
| |
Image Resolution |
1-99% at 200 lines/inch |
| |
Safelight |
Daylight handling - safe operation in fluorecent light: 8 hours |
| |
Chemistry |
Positive thermal plate developer |
| |
Processing |
Preheating Temperature: 105 - 110º C
Developer Temperature: 23º C ± 1 º C
Dwell time: 25 seconds +/- 2 seconds
|
| |
Image color |
Blue |
| |
Baking |
230º C for 2 to 4 minutes |
| |
Run Length |
0.15 mm - Unbaked: 50 000, Baked: -----------
0.30 mm - Unbaked: 100 000, Baked: 200 000 and more |
| |
Packaging |
50 plates/box if length < 1030 mm
30 plates/box if length ≥1030 mm
25 plates/box if area of each plate > 1m(sq) |
|
| |
Shelf Life |
12 months when stored in proper conditions |
| |
Storage |
Plates should be stored in a light-free area away from excessive cold, heat or high humidity.
Storage temperature: 15 - 26º C
Relative humidity: < 65%
Do not stack plates boxes higher than 1.5 meters |
Specifications are subject to change without notice. |
