Plate Type
 Conventional Negative
  Application Long run, color
 
Substrate
 Electrochemically grained and anodized lithographic aluminum
 
Plate Gauge
 0.15 / 0.25 / 0.30 mm
 
Plate Size
Maximum width of 490 mm at 0.15 mm gauge
Maximum width of 1310 mm at 0.20 / 0.25 / 0.30 / 0.40 mm gauge
 
Wavelength
 350 - 420nm
 
Sensitivity
 150-180mj/cm(sq.)
  Image Resolution 2-98% at 175 lines/inch
 
Safelight
 UV-filtered or yellow
 
Recommended Exposure

Light Source: 3kw Iodine-Gallium (metal halogen)
Distance: 100 cm
Correct exposure times should be determined using suitable test targets:
Stouffer 21 step: clear step 9
UGRA: 15-20 um micro-line
 
Final Image Color
Blue
 
Chemistry
 Conventional wet processing using standard negative-type developer
Temperature: 20 - 25º C
PH 13.00 - 13.40
Recommended speed: 0.7 - 1.2 meters/minute
  Run Length 0.15 mm: 80,000 and more
0.25 / 0.30 mm: 150,000 and more
(Actual run length may vary according to press, ink and stock conditions)
  Packaging 0.15 mm:
0.25 / 0.30 mm:		 100 plates/box
50 plates/box if length < 1030 mm
30 plates/box if length ≥ 1030 mm
25 plates/box if area of each plate > 1m(sq)
  Shelf Life 18 months when stored in proper conditions
  Storage Plates should be stored in a light-free area away from excessive cold, heat or high humidity.
Storage temperature: 10 - 30 ºC
Relative humidity: < 65%
Do not stack plates boxes higher than 1.5 meters

Specifications are subject to change without notice.