|
| |
 |
|
| |
Plate Type |
Violet Photopolymer CTP plate |
| |
Applicaton |
Commercial Print applications |
| |
Substrate |
Electrochemically grained and anodized lithographic aluminum |
| |
Plate Gauge |
0.15 mm / 0.30 mm |
| |
Plate Size |
Maximum width 1310 mm |
| |
Wavelength |
405 nm |
| |
Sensitivity |
90-100 µj/cm(sq.)
|
| |
Image Resolution |
1-99% at 200 lines/inch (dependant on platesetter & processing conditions) |
| |
Safelight |
YG10/FV50 safelights are required |
| |
Chemistry |
Developer: EG-PPD or Fuji LP-DS
Replenisher: EG-PPD-R or Fuji LP-DRS |
| |
Processing |
Preheating Temperature: 105 - 110º C
Developer Temperature: 23º C ± 2º C
Dwell time: 18 - 22 seconds
|
| |
Image color |
Green |
| |
Baking |
210 - 230º C for 2 to 4 minutes |
| |
Run Length |
Unbaked: 100 000, Baked: 500 000 |
| |
Packaging |
50 plates/box if length < 1030 mm
30 plates/box if length ≥1030 mm
25 plates/box if area of each plate > 1m(sq) |
|
| |
Shelf Life |
12 months when stored in proper conditions |
| |
Storage |
Plates should be stored in a light-free area away from excessive cold, heat or high humidity.
Storage temperature: 20 - 27º C
Relative humidity: < 65%
Do not stack plates boxes higher than 1.5 meters |
Specifications are subject to change without notice. |
